[cvsnt] Setting up client and server using winCVS and CVSNT

[Keith D. Zimmerman]

In the folder that contains the file:

C:\builds\xxx\yyy\zzz>cvs update -r 1.1 <filename>

RTFM	http://cvsbook.red-bean.com/cvsbook.html

keith d. zimmerman, mcsd 
eagle solutions

-----Original Message-----
From: Raj [mailto:rjonnadula at miraclesoft.com] 
Sent: Tuesday, May 27, 2003 4:20 PM
To: cvsnt at cvsnt.org
Subject: RE: [cvsnt] Setting up client and server using winCVS and CVSNT


Folks,

Here is the scenario. This may seem dumb but need your insight. I have a
file which is checked out(r1.1) and I made modifications to it. I once
again
imported(r1.2) the file and someone made more modifications to it(r1.3).

After a while, we wanted to go back to the earliest edition of the
file(r1.1). How do I retrieve the file.

My setup is wincvs and cvsnt are running on windows xp pro.

Thanks for your valuable time.

Raj.


-----Original Message-----
From: Raj [mailto:rjonnadula at miraclesoft.com]
Sent: Tuesday, May 27, 2003 11:24 AM
To: Keith D. Zimmerman
Subject: RE: [cvsnt] Setting up client and server using winCVS and CVSNT

Thanks a lot. I got it working. But now, where does it store the
different
versions? Using wincvs, how can I go back to a previous version? Can I
see
the revision history?

-----Original Message-----
From: Keith D. Zimmerman [mailto:keith at eagle-solutions.com]
Sent: Tuesday, May 27, 2003 11:45 AM
To: Raj; cvsnt at cvsnt.org
Subject: RE: [cvsnt] Setting up client and server using winCVS and CVSNT

it is my guess that you do not have any entries under the "Valid
Repository
Roots" list on the Repositories tab in the control panel applet

http://www.cvsnt.org/wiki/InstallationTips - check out the control panel
configuration stuff






keith d. zimmerman, mcsd
eagle solutions

-----Original Message-----
From: Raj [ mailto:rjonnadula at miraclesoft.com]
Sent: Tuesday, May 27, 2003 10:45 AM
To: Keith D. Zimmerman
Subject: RE: [cvsnt] Setting up client and server using winCVS and CVSNT


This is what I have done.

After completely installing the CVSNT and stopping and starting the
service,
I have opened a new command window and type this:

Set cvsroot=:sspi:<server name>:/TEST
Then

Cvs ls -l -r

It gave me the following error:
Cvs [ls aborted]: No valid repository roots defined. Aborting.

Yes, the client I am using is wincvs.

Raj.

 -----Original Message-----
From:   Keith D. Zimmerman [ mailto:keith at eagle-solutions.com]
Sent:   Tuesday, May 27, 2003 11:36 AM
To:     Raj
Subject:        RE: [cvsnt] Setting up client and server using winCVS
and
CVSNT

Your client is wincvs, yes?

keith d. zimmerman, mcsd
eagle solutions

-----Original Message-----
From: Raj [ mailto:rjonnadula at miraclesoft.com]
Sent: Tuesday, May 27, 2003 10:33 AM
To: Keith D. Zimmerman
Subject: RE: [cvsnt] Setting up client and server using winCVS and CVSNT


On the Client.

Raj.

 -----Original Message-----
From:   Keith D. Zimmerman [ mailto:keith at eagle-solutions.com]
Sent:   Tuesday, May 27, 2003 11:25 AM
To:     Raj; cvsnt at cvsnt.org
Subject:        RE: [cvsnt] Setting up client and server using winCVS
and CVSNT

Is this message on the client or on the server?

keith d. zimmerman, mcsd
eagle solutions

-----Original Message-----
From: Raj [ mailto:rjonnadula at miraclesoft.com]
Sent: Tuesday, May 27, 2003 10:29 AM
To: Keith D. Zimmerman; cvsnt at cvsnt.org
Subject: RE: [cvsnt] Setting up client and server using winCVS and CVSNT


How do I overcome the error " No valid repository roots defined.
Aborting" ?
I have done the setup exactly as defined in the link given below. I am
using
sspi.
Help me out.

Thanks,
Raj.


 -----Original Message-----
From:   cvsnt-bounces at cvsnt.org [ mailto:cvsnt-bounces at cvsnt.org]  On
Behalf
Of Raj
Sent:   Tuesday, May 27, 2003 9:41 AM
To:     Keith D. Zimmerman; cvsnt at cvsnt.org
Subject:        RE: [cvsnt] Setting up client and server using winCVS
and CVSNT

Keith,

Thanks a lot for your help. But the common errors I get while setting
CVSNT
up and running are as follows:
Connection to server failed
I am trying to use sspi.

Thanks,

Raj.

 -----Original Message-----
From:   Keith D. Zimmerman [ mailto:keith at eagle-solutions.com]
Sent:   Tuesday, May 27, 2003 10:22 AM
To:     Raj; cvsnt at cvsnt.org
Subject:        RE: [cvsnt] Setting up client and server using winCVS
and CVSNT

http://www.cvsnt.org/wiki/InstallationTips

keith d. zimmerman, mcsd
eagle solutions

-----Original Message-----
From: Raj [ mailto:rjonnadula at miraclesoft.com]
Sent: Tuesday, May 27, 2003 9:14 AM
To: cvsnt at cvsnt.org
Subject: [cvsnt] Setting up client and server using winCVS and CVSNT


Hi,

I am having trouble in setting up the wincvs client and server in our
company and was looking for help.
I would greatly appreciate if you can share your knowledge of setting up
the
server on a WindowsXP pro machine and similar machines for clients. What
all
do I need to do to get this setup.

Thanks,

Raj.

_______________________________________________
cvsnt mailing list
cvsnt at cvsnt.org
http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt
_______________________________________________
cvsnt mailing list
cvsnt at cvsnt.org
http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt