[cvsnt] loginfo - need information

[Vanier, Alexandre]

Yep we are using the build 1874 and yes I used the / instead of the \.
It's now working with the suggestion of Tony of adding the cmd.exe /c
I'll remember that!

Alex V. 

> -----Original Message-----
> From: Bo Berglund [mailto:Bo.Berglund at system3r.se] 
> Sent: February 16, 2005 10:42 AM
> To: Vanier, Alexandre; cvsnt at cvsnt.org
> Subject: RE: [cvsnt] loginfo - need information
> 
> Make sure you are using the latest 2.0.62 (build 1874) There 
> have been a number of script handling problems in earlier builds.
> Also note that from 2.0.62 the paths used in the script files 
> must *not* use the \ character, use / instead. So you have to 
> change like this:
> 
> DEFAULT C:\Somepath\Someprogram.exe
> to
> DEFAULT C:/Somepath/Someprogram.exe
> 
> /Bo
> 
> -----Original Message-----
> From: cvsnt-bounces at cvsnt.org 
> [mailto:cvsnt-bounces at cvsnt.org]On Behalf Of Vanier, Alexandre
> Sent: den 16 februari 2005 16:18
> To: cvsnt at cvsnt.org
> Subject: [cvsnt] loginfo - need information
> 
> 
> Greetings!
> 
> We are doing our migration of CVSNT 2.0.8 to 2.0.62 (on Windows server
> 2000) and we are almost finished!  Weeee.  Well, we do have 
> some problems but we are getting through one at the time.  
> One of the last problem left that is still bugging me is the 
> script to run in the loginfo file under the CVSROOT folder.  
> On our old server (running
> 2.0.8) we currently have this line configured in the loginfo file:
> 
> DEFAULT (echo %s) >> \\OLD-SERVER\cvs_logs\CommitLog.txt
> 
> Of course putting that line in our loginfo file on the new 
> server gave us a couple of problems with the escape 
> character.  Fine, I can write the script a little bit 
> differently, here's what we put in our loginfo file on our 
> 2.0.62 CVSNT server:
> 
> DEFAULT (echo %s) >> cvs_logs/CommitLog.txt
> 
> When we create a new project, the project will be created but 
> we will get an error because the script is not able to run properly : 
> 
> Script execution failed - path of the new project cvs.exe 
> add: warning: unrecognized response - script execution failed 
> - path of the new project.
> 
> We tried a couple of different variations for the line to 
> configure in the loginfo file and we always get this error 
> message.  Has the standard for the loginfo changed or are we 
> just to ignorant to see what is missing in the loginfo file 
> for running a simple echo command that will put the result in 
> a txt file?  Even trying to run a simple dir of the drive 
> (from the loginfo) and putting the results in a txt file give 
> us the same error message.  We don't have any permission 
> problem so far, all folders got everyone full access at the 
> moment (repository and the direcotry of the logs).
> 
> Any advices or suggestions?
> 
> Thx!
> 
> Alex Vanier
> _______________________________________________
> cvsnt mailing list
> cvsnt at cvsnt.org
> http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt
>