[cvsnt] Can't run cvsnt init on solaris

[Pierre Dehaen]

Hi,

It's now almost three days I'm trying to run cvsnt on Solaris 9, without success.

1/ I tried the compiled version cvsnt-2.5.02.2064-sol9-sparc64 from the 
site:
- I checked the 64-bit support:
    # isainfo -v
- I installed the pkg
- I added the service to /etc/services:
    cvspserver 2401/tcp   # cvs password server
- I added the daemon to /etc/inetd.conf:
    cvspserver stream tcp nowait root /usr/local/bin/cvsnt \
            cvsnt -f authserver
- # pkill -HUP inetd
- I copied and updated /etc/PServer.example:
    # cp /etc/PServer.example /etc/PServer
    # vi /etc/PServer
      Repository0=/export/home1/cvs
      Repository0Name=/cvs
      Repository0Description=My Repository
      Repository0Default=1
      Repository0Publish=1
      [other lines are left commented out]
- I checked the libraries:
    # ldd /usr/local/bin/sparcv9/cvslockd
    # ldd /usr/local/bin/sparcv9/cvsnt
  ...and decided to add the following before execution:
    # LD_LIBRARY_PATH=/usr/lib/fontconfig/sparcv9
    # LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib/sparcv9
    # export LD_LIBRARY_PATH
- Note that, anyway, it is pointing to old versions of 
libraries, so I tried:
    # cd /usr/local/lib/sparcv9
    # ln -s libmdnsclient-2.5.02.2064.so \
         libmdnsclient-2.5.02.2040.so
    #  ln -s libcvstools-2.5.02.2064.so \
         libcvstools-2.5.02.2040.so
- I started the LockServer in debug mode:
    # cvslockd -d
- The /var/adm/messages says:
    ...CVS Lock service initialised successfully
- I checked the ports:
    # pfiles 554
554:    /usr/local/bin/cvslockd
  Current rlimit: 256 file descriptors
[...snip...]
   4: S_IFSOCK mode:0666 dev:270,0 ino:26712 uid:0 gid:0 size:0
      O_RDWR
        sockname: AF_INET 127.0.0.1  port: 2402
- I telneted to the LockServer (I don't see the welcome message 
and it hangs whatever I type):
    # telnet localhost 2402
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
fdsq
fdq
^D
^C
^Z
Hangup
- I tried to start the cvslockd in debug mode:
    # /usr/local/bin/sparcv9/cvslockd -d
Initialising socket...
Starting lock server on port 2402/tcp...
Socket bind failed: errno 126 on socket 3 (AF 26) - closing 
socket
    [this msg comes from the fact I don't have a IPv6 interface 
initialized, I later did it and the 'bind failed' disappeared 
but the hanging problem did not]
- And finally the following hangs:
    # cvsnt -t -d /export/home1/cvs init
11:30:38:   -> Tracelevel set to 1.  PID is 2230
11:30:38:   -> Session ID is 8b6432004be3f08
11:30:38:   -> Session time is Thu Sep  8 09:30:38 2005
11:30:38:   -> main loop with CVSROOT=/export/home1/cvs
^Z[2] + Stopped (SIGTSTP)   cvsnt -t -d /export/home1/cvs init
    # bg
[2]     cvsnt -t -d /export/home1/cvs init&
    # kill -TERM %2;kill -HUP %2
cvsnt [init aborted]: received termination signal
[2] +  Done(1)              cvsnt -t -d /export/home1/cvs init
    # kill -TERM %1
[1] + Terminated            cvslockd -d
    #

[Note that I have to kill -TERM and kill -HUP the init process 
to be able to stop it, Ctrl-C it in the foreground does not 
work]

2/ I also tried to recompile cvsnt (after several unsuccessful 
attempts to simply "./configure && make" I found the solaris 
subdirectory) with gcc-3.4.2 from sunfreeware:
- gunzip & untar & cd
- Copy some files (this time I'm on a 32-bit system):
    # cd solaris
    # cp build_solaris32 postinstall make_install ..
    # cd ..
- Run the script:
    # ./build_solaris32
    [it works very well]
- Install the package and follow the above procedure (but there 
is no problem with the libraries nor LD_LIBRARY_PATH here)
- but the problem is the same

3/ I trussed the processes:
- The only thing that I see in the truss of cvslockd at the 
moment I try to init is:
[...]
1159:   poll(0xFFBFF920, 1, 1000)                       = 0
1159:   poll(0xFFBFF920, 1, 1000)                       = 0
1159:   poll(0xFFBFF920, 1, 1000)                       = 1
1159:   accept(5, 0xFFBFF9E0, 0xFFBFF9DC, 1)            = 6
1159:   poll(0xFFBFF920, 1, 1000)       (sleeping...)
1159:   poll(0xFFBFF920, 1, 1000)                       = 0
1159:   poll(0xFFBFF920, 1, 1000)                       = 0
[...]
- and this is the truss of the cvs init:
[...]
1169:   open64("/export/home1/cvs/CVSROOT/config", O_RDONLY) 
Err#2 ENOENT
1169:   open("/etc/netconfig", O_RDONLY|O_LARGEFILE)    = 4
1169:   fcntl(4, F_DUPFD, 0x00000100)                   Err#22 
EINVAL
1169:   read(4, " #\n #   T h e   " N e t".., 1024)     = 1024
1169:   read(4, " t i c l t s           s".., 1024)     = 168
1169:   read(4, 0x001DC0D8, 1024)                       = 0
1169:   lseek(4, 0, SEEK_SET)                           = 0
1169:   read(4, " #\n #   T h e   " N e t".., 1024)     = 1024
1169:   read(4, " t i c l t s           s".., 1024)     = 168
1169:   read(4, 0x001DC0D8, 1024)                       = 0
1169:   close(4)                                        = 0
1169:   open("/dev/udp", O_RDONLY)                      = 4
1169:   ioctl(4, 0xC00C6982, 0xFFBFEE44)                = 0
1169:   close(4)                                        = 0
1169:   brk(0x001DC7E0)                                 = 0
1169:   brk(0x001DE7E0)                                 = 0
1169:   so_socket(PF_INET, SOCK_STREAM, IPPROTO_IP, "", 4) = 4
1169:   connect(4, 0x001C4AA8, 16, 4)                   = 0
1169:   setsockopt(4, tcp, TCP_NODELAY, 0xFFBFF214, 4, 1) = 0
1169:   recv(4, 0xFFBFF378, 1024, 0)    (sleeping...)
[it hangs here]



I'm stuck now. Can anyone give me some hints ?
TIA
Pierre