Configuration files - Joins file (for CM Synergy)
The Joins file used to import the TRX into UD6 was the default. Once the XML files had been imported into CM Synergy this JOINS file was used:
UFORM:ULABEL:ULABEL::ccm_wa/ccmdb/formula-1.1/formula/sources/components.dir/*
UXGROUP:UFORM:ULABEL,UBASE::UFORM
UXFIELD:UFORM:ULABEL,GRP,UBASE::UFORM
UXREGS:U_FORMLIB:U_FORMLIB,U_NAME::UFORM
UCTABLE:U_VLAB!U_TLAB:U_VLAB,U_TLAB::ccm_wa/ccmdb/formula-1.1/formula/sources/*
UCKEY:U_VLAB,U_TLAB:U_TLAB,U_KSEQ::UCTABLE
ULANA:U_VLAB,U_GLAB:U_VLAB,U_GLAB,U_VAR::UCTABLE
UCDTYP:UDTDNAME,UMODELNAME:UDTDNAME,UMODELNAME::ccm_wa/ccmdb/formula-1.1/formula/sources/dtd.dir/*
UCFIELD:U_VLAB,U_TLAB:U_VLAB,U_TLAB,U_FLAB::UCTABLE
UCGROUP:U_GLAB,U_VLAB:U_GLAB,U_VLAB::ccm_wa/ccmdb/formula-1.1/formula/sources/*
UCRELSH:U_GLAB,U_VLAB,U_RGLAB:U_GLAB,U_VLAB,U_RGLAB::ccm_wa/ccmdb/formula-1.1/formula/sources/relationships.dir/*
UCSCH:U_VLAB:U_VLAB::ccm_wa/ccmdb/formula-1.1/formula/sources/schemas.dir/*
USOURCE:USUB!UVAR,ULABEL,ULAN:USUB,UVAR,ULABEL,ULAN::ccm_wa/ccmdb/formula-1.1/formula/sources/globals.dir/*
UAPPL:ULABEL:ULABEL::ccm_wa/ccmdb/formula-1.1/formula/sources/applications.dir/*
UAPLFRM:ULABEL:ULABEL,UFORM::UAPPL
USIMPL:UIMPLNAM:UIMPLNAM::UFORM
USILINK:UIMPLNAMCAL:::USIMPL
USIMPKW:UIMPLNAM:::USIMPL
USIOPER:UIMPLNAM:::USIMPL
USIPARM:UIMPLNAM:::USIMPL
USSPEC:USPECNAM:USPECNAM::UFORM
USLINK:USPECNAMCAL:::USSPEC
USOPER:USPECNAM:::USSPEC
USSPCKW:USPECNAM:::USSPEC
USPARM:USPECNAM:::USSPEC
USMENU:UMENU,UVAR,ULAN:UMENU,UVAR,ULAN::ccm_wa/ccmdb/formula-1.1/formula/sources/menus.dir/*
USITEM:UMENU,UVAR,ULAN:UMENU,UVAR,ULAN,UTECHSEQ::USMENU
UGREGS:U_FORMLIB,U_NAME:U_FORMLIB,U_NAME::ccm_wa/ccmdb/formula-1.1/formula/sources/registers.dir/*
USICPLB:UTLBNAM:UTLBNAM::ccm_wa/ccmdb/formula-1.1/formula/sources/typelibraries.dir/*
USILBCP:UTLBNAM:UTLBNAM::USICPLB
USILBSS:UTLBNAM:UTLBNAM::USICPLB
UGGIF:U_MLAB:U_MLAB::ccm_wa/ccmdb/formula-1.1/formula/sources/templates.dir/entityinterface.dir/*
UGFIF:U_MLAB:U_MLAB::ccm_wa/ccmdb/formula-1.1/formula/sources/templates.dir/fieldinterface.dir/*
UGFLAY:U_MLAB:U_MLAB::ccm_wa/ccmdb/formula-1.1/formula/sources/templates.dir/fieldlayout.dir/*
UGFSYN:U_MLAB:U_MLAB::ccm_wa/ccmdb/formula-1.1/formula/sources/templates.dir/fieldsyntax.dir/*
UTPLFLD:TEMPLATENAME:TEMPLATENAME::ccm_wa/ccmdb/formula-1.1/formula/sources/templates.dir/field.dir/*
UTPLFRM:TEMPLATENAME:TEMPLATENAME::ccm_wa/ccmdb/formula-1.1/formula/sources/templates.dir/component.dir/*
UTPLGRP:TEMPLATENAME:TEMPLATENAME::ccm_wa/ccmdb/formula-1.1/formula/sources/templates.dir/entity.dir/*
USUBS:USUBSYSTEM:USUBSYSTEM::ccm_wa/ccmdb/formula-1.1/formula/sources/subsystems.dir/*
UGLYPH:UCSUB,UCLABEL,UCVAR:UCSUB,UCLABEL,UCVAR::ccm_wa/ccmdb/formula-1.1/formula/sources/glyphs.dir/*
This is the final JOINS file that was used once the sources were imported into a CM Synergy work area.
Configuration Files
How to use the driver with CM Synergy / Continuus CM (cont.)
Taking control in CM Synergy
Releasing a form using CM Synergy
Checking a form in using CM Synergy
Adding a form using CM Synergy
Finding the differences in versions using CM Synergy
Problems when using CM Synergy
UD6 Overview
A methodology to Uniface source code control
Using UD6/CMtool and Uniface with CM Synergy.
$Revision: 1.8 $ $Date: 2011/02/28 02:56:32 $ | [go to top] |